556 results found
-
I.D Caller Solutions
Can there be a feature to use when making outbound calls to my client's customers where my business name doesn't show up on their ID caller but instead just a number. I offer call services in business but I have to go through extra measures to make calls i.e make my number private which most people don't respond to when private or using a client's Google Voice account.
1 vote -
Auto Dial missed call numbers.
An option to create a rule that automatically assigns missed call numbers to a specific user, who will then be automatically dialed by the system as soon as they come online.
1 vote -
Yealink Base with Multiple Yealink Handsets to Ring Sequentially.
Feature Request : 1 Yealink Base with Multiple Yealink Handsets to Ring Sequentially.
Details : Want to have the ability to set the sequence of how a call routes to 1 base with multiple handsets paired.
Significance of the feature : To be able to maximize the wireless capability of the yealink cordless phone.
Current behavior : No option to change the forwarding setting of a handsets that's paired to a single base station.
3 votes -
Automatically put phone calls on hold if busy
If the phone line is busy, instead of manually placing clients on hold, the system will automatically put the new call on hold and inform them that we are currently assisting other clients.
1 vote -
Setting up how many times the phone will ring before forwarding
I used to be able to do it. I would set up how many times it could ring before it forwarded. If I set it for 7 rings, the faxes would go through before the call was forwarded.
1 vote -
Allow users to select a Delegated DID as their primary outbound caller ID
Use case:
* An entire office of RingEX users needs to use the same outbound caller ID. This phone number is also the primary number used for their Contact Center (RingCX).Feature request:
* Add support for using a Delegated DID as the primary DID used for outbound calls on all the Apps.2 votes -
multiple numbers on 1 device
We need to have multiple numbers on one device. Limited or Full license would be fine but we need to have the ability to have several DID numbers to show up on one phone so one person can answer it.
1 vote -
Make all of the customer's phone numbers accessible to the admin
Customers in Germany often use blocks of numbers (e.g. 0-99). These belong to the customer and are ported to RingCentral. As admin, I currently do not see any of these numbers in the service portal and therefore cannot quickly configure a new extension or queue. This non-feature is not acceptable for the German market. Please make all the numbers of the customer visible and usable in the inventory. Thanks!
1 vote -
Provide a hangup sound when someone disconnects a call because I am oftern in my CRM and not looking at the RingCentral App.
Provide a hangup sound when someone disconnects a call. I am usually in my CRM and not looking at the RingCentral App, and right now I have to click over there to see if we're disconnected. It's a waste of time for me and time is $$. Thank you.
1 vote -
Park call routes to voicemail
Allows Park Calls to automatically forwarded to the voicemail after exceeding the time out minutes
2 votes -
Caller ID scrolling speed setting
When the call is initiated there is only a few seconds to see the initial few details from the caller ID, in my case it is the company for which the caller is reaching out to. By the time I see the caller ID it has passed and is now displaying the caller's registered name and I have to wait until it completes and starts the scrolling over again. This leaves the caller's line ringing for 4-7 rings depending on how many rings it took to connect to me.
TLDR: IF we could adjust the scroll timing I could improve…
1 vote -
Dial-in number for Jakarta, Indonesia
Currently, no international audio conferencing dial-in number is available for Jakarta, Indonesia. Establishing such a number would be beneficial for addressing business needs.
1 vote -
Ability to Return a missed call to the extension who made the call through the main company number
When customer called someone using the company main number as the caller ID and for some reason nobody picked up, They would like to have an option for the dialed number/called person to return the call through the company main number and redirect the call immediately to the extension who made the call
1 vote -
Adding 4th account on the RC desktop app
I currently toggle between 3 different ringcentral accounts on the app, and need to add a 4th account, but get an alert that says "maximum accounts reached. you've added the maximum number of accounts. please remove one and try again." I unfortunately can't delete any of the accounts because I use them all. Is there a way to add another account?
1 vote -
Add Shared Lines Functionality to the Desktop App
Why do shared lines only work on desk phones? It would be great to have shared lines on the softphone too.
3 votes -
Yealink T57W add contacts via usb
yealink expansion module, add contacts to expansion module via usb
1 vote -
Ring deskphone only when receiving contact center calls
Customer verbatim
"Force CC calls through desk phone
How can we route all CC calls through the desk phone and not through the soft phone. I have a situation: Both phones are connected and the employee is logged into the RingCentral App. The app says do not ring desk phone, but when a CC call comes in it still rings the desk phone. How can the CC call be only routed to soft phone?"- They are forcing everyone to use one device only the deskphone due to lots of disconnected calls.
- They only want deskphone to ring when receiving cc…
1 vote -
3 votes
-
Allow specific phone call from company directory to come through while on DND
Have the option wherein we can set either a custom rule or a button that allows calls coming from numbers in the company directory during after-hours and while the users are on DND.
2 votes -
call recording
Allow call recording to be started while the phone is ringing and not only when the call is answered by person or voicemail.
4 votes
- Don't see your idea?