118 results found
-
Enhanced Dialer & Voicemail Control for Agents
Currently, RingCentral’s dialer and voicemail functionalities limit agent flexibility and efficiency. Personalized voicemail drops require an admin to create a separate campaign-level disposition for each agent’s custom recording, making it unscalable for teams. Additionally, in Progressive Dialer mode, agents cannot stop or cancel a call once the system begins dialing, which disrupts workflows and reduces operational control.
This feature request proposes enhancements to provide agents with:
Scalable, agent-specific voicemail options without needing manual admin configuration.
The ability to cancel or stop calls in progress within the Progressive Dialer to improve responsiveness and control.These improvements aim to streamline agent workflows,…
1 vote -
add text message notigications for managers when agents states are incorrect
Would be great to have a feature that allows managers/supervisors to receive text message notifications when agent states are abused. Example, an agent in an RNA state for more than 1 min. Manager would receive a text message alerting them of the agent's state.
1 vote -
Fix Browser Refresh Logging Agents Out Of CX
When logged into RingCX as an agent, a browser refresh will log the agent out. If the agent is on a call during a refresh, it does not disconnect the call, but it will not allow them to disposition the call afterwards, even after logging back in. This browser refresh issue is only when logged into the Agent portal; Analytics and Admin work just fine through a refresh.
34 votes -
RCX - Plantronics hub Compatibility with RCX
Ability to allow the use of the Plantronics hub through RCX.
Customers who are using the RingCentral Office phone via the RCX and the RC app is integrated with the Teams app should be able to use the Plantronics hub without an issue.
2 votes -
Subject: Feature Request: Separate Disposition and Wrap-Up Settings in RingCX
Summary:
We request a feature enhancement for RingCX that allows Wrap-Up settings to function independently, even when Agent Disposition is disabled. Currently, the Disposition prompt is tied directly to Wrap-Up, making both share the same time settings. This limitation restricts operational flexibility and does not align with customer preferences for separate configurations.Detailed Description of the Request:
At present, in RingCX, the Disposition prompt and Wrap-Up are intertwined:If Disposition time is set to 30 seconds, the same applies to Wrap-Up time.
Disabling Disposition entirely also disables Wrap-Up functionality, which is undesirable for customers who prefer one without the other.…7 votes -
Synchronization of External Shared Contacts between RingEX and RingCX Directories
Feature Request: Synchronization of External Shared Contacts between RingEX and RingCX Directories
Request Overview: The customer requests the ability for external shared contacts that appear in the RingEX company directory to also be visible in the RingCX directory.
Current Behavior: Currently, external shared contacts added to the RingEX company directory do not automatically appear in the RingCX directory. This lack of synchronization requires users to manually add or manage contacts across both platforms, resulting in duplication of efforts and potential discrepancies between directories.
Requested Enhancement: Enable automatic synchronization of external shared contacts between the RingEX company directory and the RingCX…
18 votes -
RingCX: Add Call Log and Report to Quick Access on Home Page
Currently, the RingCX home page has a "Quick Access" section. We would like to request the addition of two new, configurable links to this section: "Call Log" and "Reports."
Having these links readily available on the home page would save time and clicks for our agents and administrators, allowing them to quickly access key information and analytics without navigating through multiple menus. This feature would significantly improve the user experience and overall efficiency when using RingCX.
1 vote -
Unavailable Code Logout Timer
NICE CXone has a "Agent Timeout" setting on each unavailable code. Please add the functionality to toggle on an "Agent Timeout" for each unavailable code. When enabled, and the agent reaches the value set for the timeout, the agent would be logged out of the RingCX system. This is useful for agents that put themselves into an unavailable code like Lunch, without realizing they are taking the rest of the day off. For example, most employees take a one hour lunch break. The "Agent Timeout" for the Lunch available could would be set to 120 minutes (two hours). The agent…
1 vote -
Agent State
Make Agent States by Agent and not a global setting.
1 vote -
Ability to Disable RingCX button inside the Glip while keeping RingAgent
Businesses who have the RingAgent button on the RingCentral desktop app. should have the option to remove the existing RingCX button on the RingCentral app. without losing the other one which is the RingAgent.
It would help to avoid confusion with the users in accessing the RingCX since they are using different audio paths. The RingCX button uses the Integrated softphone on RingCX and the RingAgent will use the audio path on RingCentral glip.
8 votes -
Add manual dialing for referred customers
When some potential customers mention that they know someone who is looking for or needing our services and want to give us their number, or when they indicate that their spouse is the one we need to speak to and volunteers their number - it would be ideal and a great aid if we were actually able to use that information to take advantage of the presented opportunity and cease the moment and get referred customers.
1 vote -
Pie chart report displaying a list of agent names along with the total number of answered calls shown on the Realtime dashboard
The customer requested a Pie chart report displaying a list of agent names along with the total number of answered calls shown on the Realtime dashboard.
1 vote -
Calls should return with specific reasons such as invalid, rejected, blocked, and declined
When calls are returned with "INTERCEPT" they should be more specific such as values like "Invalid" "Rejected/declined" or "blocked"
Currently there are several different outcomes that return that value and it would be exponentially easier to differentiate the reason instead of lumping in several outcomes into one. Codes are sent out which help tell on the back end, but end users and admins would benefit from knowing that without manually going in to see what exactly that means
9 votes -
Agent State Changes while Engaged
We would like the ability to update agent state to 'break' 'lunch' or 'away' while engaged instead of just 'break' being the default and only option.
2 votes -
Requesting an enhancement to have on-screen notifications for incoming calls, regardless of state the agent. The notification should have th
Requesting an enhancement to have on-screen notifications for incoming calls, regardless of state the agent. The notification should have the following traits/characteristics:
Auto-dismiss if no agent answer and customer hangs up before sending to agent VM greeting.
Contain 'Accept' and 'Decline' buttons which direct the call. 'Accept' will allow a call through to the agent. 'Decline' will send the customer to the agent's VM greeting.
Any other pertinent information to be included (i.e. number of incoming caller, etc.)
17 votes -
Warm Transfer Improvement
Currently if a customer is on hold while the agent is performing a warm transfer, and the customer hangs up, it hangs up the call for all parties. If the customer is placed on hold, and the agent is announcing the call to the other department/party, if the customer hangs up, it should not hang up the entire call.
15 votes -
Add Session timeout for RingCX user
For security reason some customer make it a mandatory requirement to get session timeout on Contact Center product.
Bare minimum would be a session timeout applied to all user on RingCX.
A better solution would be to make it a setting that is applied to user profile or role in order to be able to set different values for admin, supervisor and agent.
Also customers who rely partly on BPO to handle CC conversations sometimes enforce more constrains on their BPO than internal agents resulting in the request to set the timeout to a shorter time on some agents only.15 votes -
Call Timers for Agents
When on a call, we would like to see call timers when a caller is placed on hold. Standard practice is not to let a caller stay on hold for more than 2 minutes without checking back in with the client. However, RingCX lacks call times when completing multi-party calls. The Active Call List doesn't have timers running (or visible).
13 votes -
Include Name & Number in Caller ID
Request is to have both the Name and Number appear. Currently, the name only shows if the number is in a Campaign.
25 votes -
Lower the volume of RingCx Agent when you are on "TRANSITION" state, that "brrrp" is annoying
there should be a way, that when we are on fetching leads mode, the "transition" stop making that annoying noise that "brrrp brrrp" when you are calling someone is really annoying, hearing that noise all the day its crazy
2 votes
- Don't see your idea?