363 results found
-
RIngCX - Fixed amount for Agent States
We would like agents to only be in certain states for a fixed amount of time and for the agent's state to be automatically changed to available
3 votes -
Manual Call Recording for Manual Outbound Calls
All 140 Agents that place Manual Outbound Calls in RingCX need the ability to decide when/if they record their calls. If they do choose to record the call, they want to be able to drop a Audio File that will play to the customer that the call is being recorded (this is currently not supported with Manual Outbound Calls but is possible with the Dialer).
3 votes -
Rinsense for RingCX icon RingCentral app
Hello Team,
I hope you're doing well.
We’ve observed that currently, only RingSense for Sales (RingEX) is available as an icon within the RingCentral app. However, now that RingCX (SPOG) is fully integrated with the RingCentral platform, we would like to request the following enhancement:
Add RingSense for RingCX as an icon in the RingCentral app.
Alternatively, enhance the existing RingSense icon so that users can choose between RingSense for RingCX and RingSense for Sales/RingEX upon clicking it.
This would greatly improve user experience and accessibility for customers leveraging both RingCX and RingSense, ensuring a unified and intuitive interface.
Please…
6 votes -
monitoring
Within RingCX Supervisor, when selecting real-time monitoring, the RingCx dial pad populates, allowing the supervisor to Whisper and Barge if needed. It also allows the call to be disconnected, meaning the caller and the agent will be disconnected if the end call button is selected by the supervisor from the dial pad. Please disable the end call option, or at a minimum after that is selected a choice should be presented to allow the supervisor to stop monitoring, or to fully disconnect all callers.
I realize that in the top banner of the supervisor window, monitoring can be stopped without…
2 votes -
Allow agents to set a specific callback date and time when selecting the "Callback" disposition during manual calls.
When an agent selects the "Callback" disposition, a date and time picker should appear, allowing the agent to set the exact date and time for the callback as provided by the customer.
3 votes -
RingCX Digital: Email Address on To/CC Fields
There should be a Reply All option in RingCX Digital Email. When selected, it should add all email addresses from both the To and CC fields into the To field of the reply, ensuring that everyone in the original conversation receives the response.
3 votes -
Improved display of RingCX agent status in Ringcentral app
Is it possible to improve display of the agent status of RingCX in the Ringcentral app integration?
Background: During brief network interruptions, agents are disconnected without necessarily noticing. A pop-up notification that they have been disconnected and/or a clearer display of the status in accordance with WCAG 2.1m, e.g., using larger icons or color-coded status fields, would help agents.2 votes -
establishing contact information in RingCX incoming call
Agent would see a pop-up on the right side of the app showing the contact information during an inbound call.
They would update it but when the same customer call back in, the information won't show their name, just showing the number and unknown
Customer suggested that if possible to show the contact information so that the agents would be notified whether the caller is a VIP or not.5 votes -
Clarify Error Message for Unsupported Transfers from RingCX to RingEX Extensions
Currently, when agents using RingCX attempt to transfer a call to a RingEX extension via the corporate directory, the system presents a misleading "congestion" error. This message suggests a network or capacity issue when the true cause is that transfers to RingEX extensions are not supported in RingCX.
This leads to agent confusion, unnecessary troubleshooting, and increased support tickets. We request a clearer, more accurate system message such as "Unsupported transfer destination" or "Transfers to RingEX extensions are not currently supported" to replace the generic "congestion" message in these cases.
6 votes -
Hold Feature Enhancement
Lack of clear hold indication creates compliance and customer experience risks.
Inability to confidently place a member on hold or manage multi-party communication interrupts workflow efficiency.Feature Request:
Add a clear visual indicator or status confirming when a member is on hold.
Enable a true multi-line experience, where agents can:
Put the member on hold.
Speak privately with a help desk or back office.
Resume the call with the original member after the side conversation.
Improve supervised transfer behavior to ensure the original caller is reliably placed on hold while internal consultations occur.
4 votes -
Wrap Time / After Contact Work
After Contact Work – Display and Reports. Currently when a voice interaction ends, the agent state changes to Available and the timer restricts another call until the timer expires. Optimally, we have an actual after contact state that has an expiration timer and an agent override. The ACW would need to be reportable for time in this state, especially useful if agent can end early ( for example, to be able to see that they were allocated 30 seconds and only used 8 seconds. ACW would ideally be programmable for Voice only and Voice, SMS, Email etc.
ACW status should…
163 votes -
RingCX should be compatible to all Headsets
Currently, RingCX is only compatible with RingCentral-recommended headsets. We are requesting to expand the compatibility of all headset brands, not just RingCentral-recommended headsets.
3 votes -
Have a single page for Supervisors to see Stats and Supervisor tab data.
Today if you want to view call stats such as seeing how many are in queue, a supervisor has to switch between Stats and Supervisor tab to monitor both.
It would be nice to have one view to see all relevant information about the current stat of the queue and agents together. Essentially combining Stats & Supervisor tabs together.
Having a few like this backed behind permissions so even Agents could have a similar view but not have the supervisor controls like listen would be ideal. It let's agents manage their times and breaks better knowing the status of other…
3 votes -
Caller ID when transferring a call.
Display the Outside Caller ID when a call is forwarded. I would like to see the caller's ID and not that of the extenstion who forwarded the call.
8 votes -
Automatic Login and Schedule-Based Agent Availability in RingCX
Customers are requesting the ability to automate agent login and status management within the RingCX platform. Specifically, they are looking for a feature that allows setting a predefined schedule (e.g., Monday to Friday, 8:00 AM to 4:00 PM) during which an agent is automatically logged in and placed in an "Available" status. This would eliminate the need for agents to manually log in and out of RingCX daily.
This functionality would improve operational efficiency, ensure timely availability, and help avoid missed logins or agent delays—especially in environments with strict schedule adherence requirements. This could also potentially integrate with workforce management…
4 votes -
The customer wanted the option to change the Inbound call detail information in the RingCX|Agent application from DNIS to Caller ID Name.
The customer wanted the option to change the Inbound call detail information in the RingCX|Agent application from DNIS to Caller ID Name.
8 votes -
Select Agent Queues from Single Pane of Glass or SPOG
If you are a member of multiple Agent Queues and log in through the SPOG in the EX client, you cannot select which queues to log into.
Need to be able to select which queues you are logging into when singing in via SPOG in EX.
4 votes -
superview what tier the rep is in for the line of business.
Can we get in the superview what tier the rep is in for the line of business.
So if they are in tier 1 in auto when they answer a uto call it would say tier 1. if they are in tier 2 homes if they answer a auto call it would say tier 2 and so on?
1 vote -
Expand Agent Notes on Disposition window
Currently, when agents are in the Disposition state and enter disposition notes, the notes field does not expand once the content exceeds a single line. This limits visibility and makes it harder for agents to review or edit longer notes.
Proposed Enhancement:
Enable the Agent Notes field to automatically expand (or provide a manual resize option) when text exceeds one line, allowing agents to view and edit their full notes without excessive scrolling.Benefits:
Improves note-taking efficiency
Reduces errors from missed or overlooked information
Enhances agent experience and productivity
3 votes -
Feature Request – Persistent RingCX Session Across Page Reloads and Tabs
Issue Description:
• Currently, users are required to log in again when they reload the page or open a new tab in RingCX. Additionally, in Salesforce, users must repeatedly select their RingCX account and voice connection options (integrated softphone, RingCentral Office phone, or external phone) every time they switch tabs or refresh the page.Customer Impact:
• Users experience frequent login prompts, disrupting workflow efficiency.
• Increases frustration when handling multiple customer interactions in Salesforce.
• Impacts productivity, as agents must reconfigure their voice connection multiple times.Requested Enhancement:
• Implement persistent session handling so that users remain logged in…9 votes
.png){kind=link}
- Don't see your idea?