566 results found
-
Caller ID scrolling speed setting
When the call is initiated there is only a few seconds to see the initial few details from the caller ID, in my case it is the company for which the caller is reaching out to. By the time I see the caller ID it has passed and is now displaying the caller's registered name and I have to wait until it completes and starts the scrolling over again. This leaves the caller's line ringing for 4-7 rings depending on how many rings it took to connect to me.
TLDR: IF we could adjust the scroll timing I could improve…
1 vote -
Dial-in number for Jakarta, Indonesia
Currently, no international audio conferencing dial-in number is available for Jakarta, Indonesia. Establishing such a number would be beneficial for addressing business needs.
1 vote -
Ability to Return a missed call to the extension who made the call through the main company number
When customer called someone using the company main number as the caller ID and for some reason nobody picked up, They would like to have an option for the dialed number/called person to return the call through the company main number and redirect the call immediately to the extension who made the call
1 vote -
Adding 4th account on the RC desktop app
I currently toggle between 3 different ringcentral accounts on the app, and need to add a 4th account, but get an alert that says "maximum accounts reached. you've added the maximum number of accounts. please remove one and try again." I unfortunately can't delete any of the accounts because I use them all. Is there a way to add another account?
1 vote -
Yealink T57W add contacts via usb
yealink expansion module, add contacts to expansion module via usb
1 vote -
Ring deskphone only when receiving contact center calls
Customer verbatim
"Force CC calls through desk phone
How can we route all CC calls through the desk phone and not through the soft phone. I have a situation: Both phones are connected and the employee is logged into the RingCentral App. The app says do not ring desk phone, but when a CC call comes in it still rings the desk phone. How can the CC call be only routed to soft phone?"- They are forcing everyone to use one device only the deskphone due to lots of disconnected calls.
- They only want deskphone to ring when receiving cc…
1 vote -
An option to set a scheduled caller ID.
An option to set a scheduled caller ID that users can use for outbound calls, with different IDs for business hours and after hours.
1 vote -
Jabra engage 75 headset compatibility For BT
Jabra engage 75 headset compatibility For BT
1 vote -
BT Call forwarding via Virtual Extensions
In RC JIra RC-62900 we have come across an architecural limitation for BT accounts with International numbers(non-UK numbers). In BT accounts with international numbers, the extensions without primary number cannot conduct call forward to PSTN as the PAI/DIV headers can only contain the UK main company number.
Impacted Use case: Call forwards can be easily configured in the account using virtual extensions, ie the call flow PSTN-> Extn A call forwards -> Extn B(without primary number) call forwards to -> PSTN Dstn
Extn A will be able to configure a call forward to a frequently used PSTN Dstn using the…1 vote -
Support Intercom Yealink W59R
Request to support the intercom feature on Yealink DECT phones, specifically for the W79P part number (W59R handset + W70B base).
Notes from Yealink.
DECT supports two types of Intercom, the first is the RC Intercom supported by the RC Server and the second is the internal Intercom supported by the DECT Base itself.For the first type of RC Intercom, there is no difference between the logic of DECT and desktop phones, it is done through the RC server and can Intercom any Extension.
Regarding the second type of internal Intercom, it is implemented by our DECT Base, not…1 vote -
Sent to voicemail during the call.
Since some people during the call request to be sent to voicemail, it would be great if this could be considered for future functionality.
We have the option to record the call, but sometimes people request the "privacy" of sending a message to voicemail without the person on the other end of the line hearing them. Thank you very much.
1 vote -
"transfer to held call"
I need to initiate a transfer between the two calls
our last phone service had a "transfer to held call" option1 vote -
Send caller to voicemail when on hold
ability to send a caller to voicemail when it reaches a minute on hold
1 vote -
BT Analog bell with to work with BTCW when it's connecte to ATA
BT Analog bell with to work with BTCW when it's connecte to ATA
1 vote -
Auto receptionist
We need an option to redirect or route calls to a different extension when the caller presses an invalid or non-existing extension.
1 vote -
Feature Request : Cisco 8851 to have the users appear as a list on the Corporate directory
Feature Request : Cisco 8851 to have the users appear as a list on the Corporate directory
Details : Having the option to display the list of users in the corporate directory instead of searching for each user
Significance of the feature : allows to easy display on the user list instead of typing the name
Current behavior : only has the option for Simple and Advance search and no option to display user as a list
Brand : BT1 vote -
1 vote
-
Allow multiple outbound call simultaneously.
The client mentioned that tit would be better if an extension can permit 5 or more people to do an outbound call simultaneously on an extension.
1 vote -
Echo Test Feature Code
Echo Test Feature Code. The ability to call a feature code or built in extension number that will connect the call from a phone to the Cloud Server and loop the call back live to the same phone. This feature would allow for audio diagnostic testing from the same extension as it would simulate both out bound network traffic and inbound network audio traffic at a slight delay (ie an echo). This feature would be especially helpful in SD-WAN setups that do not drop calls when networks go offline. An Example of this is Sangoma's FreePBX/PBXact built in *43 feature…
1 vote -
We have two phones connected to the same phone and they are not able to be picked up to reach the same caller.
We should be able to connect a call with the deskphone and handheld phone that are connected to the same line. They are not able to pick up and speak to the same caller.
1 vote
- Don't see your idea?