116 results found
-
dashboards data refresh time
customers would like to have over dashboards in RCX ( especially the real time dashboards) a shorter refresh time - 1s or 3s instead of 5 seconds.
42 votes -
Allow Using the Hold Button on the Desk Phone
Need to be able to use the Hold Button on the user Desk phone for RingCX call backs
-hold button on desk phones works properly for everything except for RingCX callbacks
-current behavior of Hold buttons on RCX callbacks are it is playing wav files that is not setup on client/company's audio files; rather it plays it files under RCX's Global Audio Files34 votes -
In-Queue-Callback Number Restriction To Prevent Misuse
The RingCX Callback feature currently allows users to enter an alternative number for a callback, with the sole restriction being that the number must originate from the same country as the inbound ANI country code.
However, there is a potential risk of abuse by malicious actors or scammers, who could exploit this feature to generate revenue for themselves by using premium rate numbers for the callback, resulting in financial implications for our customers.
To mitigate this risk, I would like to suggest implementing the ability to restrict specific numbers from being used for callbacks by creating a blacklist.
25 votes -
Delay in the event after "Single Play Audio"
At present, after the first two single play audio files are played, there is about a 4-7 second delay before moving to the next queue event. This has been identified a bug by EVCR (https://jira.ringcentral.com/browse/EVSE-8256)
Steps to reproduce
setup duration of first queue event to 38
call into the queue and listen if there will be a delay after playing 2 files
setup duration of first queue event to 39
call into the queue and listen if there will be a delay after playing 2 filesActual behavior
There is delay after the end of playing 2 files…
16 votes -
Ability to cancel or extend after call wrap
Problem:
In RingCX, a customer can configure a specified amount of time for an agent to have after call work time (Wrap Time). In its current state, agents are not able to cancel the additional configured work time early or extending the time without changing their status.
Issue 1 - If a queue has a configured Work Timer configured for post call activity, if an agent is ready to take the next call early, they have no way of terminating or canceling the Work Time early and must wait until the timer expires to get the next call which and…
33 votes -
Impersonated admin showing incorrectly in the audit trail
We need an update to the Audit Trail.
Currently, if one person who is an Admin, logs in on behalf of User Name, then it shows the 'user' in the audit trail, not the 'admin on behalf of' details.
In Engage Digital, this shows "Admin on behalf of user X" as it does in RingEX.
14 votes -
RingCX - Survey report
The ability to get a report on surveys both for voice and digitial.
Ability to see how many surveys were sent, how many answered, results of the replies, overall score etc.
24 votes -
Dashboard view modification
Please add an option to hide the extra part at the bottom for the real-time dashboard.
21 votes -
Outbound WhatsApp within RCX agent UI
As an agent, the option to send a new WhatsApp message within the RCX agent UI is missing. This is available for other platforms (email, Facebook, X, etc.) but not for WhatsApp.
This is something that is available via API, so this request is specifically for the functionality to be added to the agent UI within RingCX.17 votes -
Wrap Time / After Contact Work
After Contact Work – Display and Reports. Currently when a voice interaction ends, the agent state changes to Available and the timer restricts another call until the timer expires. Optimally, we have an actual after contact state that has an expiration timer and an agent override. The ACW would need to be reportable for time in this state, especially useful if agent can end early ( for example, to be able to see that they were allocated 30 seconds and only used 8 seconds. ACW would ideally be programmable for Voice only and Voice, SMS, Email etc.
42 votes -
RingCX Analytics Report - Agent Name, Email Address, Status (Active or Inactive)
Customer wants to have a report in RingCX Analytics that shows Agent Name, Email Address and Status (Active or Inactive) that will tally to the total number of agents in Admin>Users.
6 votes -
Feature Enhancement Request: Total Hours/Log-in Time on Campaign Level in Historical Reports
Description:
We received a customer request related to RingCX reporting, specifically regarding the ability to capture total hours/log-in time at the campaign level in the historical reports. Currently, they are utilizing the Daily Outbound Performance report, but while there is a breakdown of hours on an agent level, the customer is requesting an additional data point that aggregates these hours by campaign.
Use Case:
The customer needs visibility into total hours spent on a per-campaign basis for better campaign performance tracking and resource allocation. While agent-level hours are available, a campaign-level breakdown would provide a more comprehensive view of the…4 votes -
AI Optimal Routing based on Last Agent Sentiment, Disposition, etc.
Last Agent Sentiment Advances in AI makes optimal routing possible, routing new interactions based Last Agent Sentiment (if this customer interacted with this agent and it was positive based on agents’ availability direct new interaction to this agent. If the last interaction between this customer and the agent (who is due the next interaction) was negative, redirect to next agent skipping this potential negative conversation. This needs to be reportable that includes customer information like phone number or email for digital, the agent skipped and possibly the actual agent and the interactions sentiment outcome versus last with up/down metric showing…
24 votes -
Call journey report for RCX
Currently within RCX we do not have the option to trace a call and show the call journey details like we are able to in MVP. For this specific prospect the ask was for a call journey reports that shows transfer detail, however, from a demo and overall competitive point of view it would be great if RCX can match the call journey report we have on MVP as it is a missing feature today.
34 votes -
Access to Transcript URL for Engage Messaging Channel Type in RingCX Analytics
Access to Transcript URL for Engage Messaging Channel Type in RingCX Analytics
Summary: The current implementation of RingCX Analytics provides interaction summaries and transcripts through the Transcript URL for various channels. However, when filtering by the Channel Type "Engage Messaging," the Transcript URL field is empty. We are requesting an enhancement to include and display transcript URLs for Engage Messaging interactions, aligning the functionality with other supported channels.
Problem Statement: When analyzing interactions through the RingCX Analytics dashboard, transcripts are essential for reviewing communication history, particularly for compliance, training, and quality assurance purposes. While transcript URLs are available for other…
4 votes -
Feature Enhancement Request: User State + Queue Visibility and Call Pickup Dashboard
Background:
The client has requested a Digital Dashboard feature that provides real-time visibility into user states and queue activity, along with the capability to manually intervene by grabbing calls from the queue. The existing dashboard solutions do not provide this level of operational control, requiring supervisors or agents to switch between multiple interfaces to monitor states and queue metrics. The client needs an integrated solution for improved visibility and efficiency.Request Summary:
Develop a real-time dashboard within RingCX Analytics that displays:User State Monitoring:
Shows individual user status (e.g., Available, Offline, On Call, After Call Work, Busy, etc.).
Displays which…3 votes -
Add wrap up time for RingCX auto-dialer calls (Campaign)
Customer is requesting to add wrap up time for RingCX auto-dialer calls (Campaign).
Currently, there is no setting within the campaign to set the wrap up time and this causes agents that are on blended skills to receive an inbound call after they finished their dialer calls.
3 votes -
RingCX Time Based Callback-in-Queue Offering
It is important to use time-based Callback-in-Queue so that when a queue is ending callbacks aren't left waiting until the next day. Time- based Callback offering could turn off callbacks being offered 10, 15 or 30 minutes prior to Queue closing. Phase 2 could be time and "chance of answering" using AI to determine if a callback is offered can it be answered while the Queue is active such as number of agents, active talk time versus time left in Queue before closing.
19 votes -
Improve handling media for Queue events
After the first two single play audio files are played, there is about a 4-7 second delay before moving to the next queue event. Expected behavior is there is no delay after the end of playing 2 files.
2 votes -
Support interaction logging with no disposition in all applicable embedded CRM integrations
In all of RingCX embedded integrations with third party CRMs, dispositions are required to complete the logging of that interactions details into the the CRM. When there is no disposition configured on the source of the interaction, support a workflow that logs the interaction details when that interaction is ended.
2 votes
- Don't see your idea?