1071 results found
-
Sync RingCentral Desktop Application With RingCX
RingCentral should implement a call status synchronization between the RingCentral Desktop application and RINGCX. When you are on a call using your RingCentral desktop application, this status should be reflected in real time to RINGCX preventing the RingCX app from present you an additional incoming call.
Key Points:
1. Real Time Status Updates: Both RingCentral Desktop and RingCX should be able to communicate real time call statuses to each other. When you answer or make a call on one platform, the other should recognized that you're on an active call.Presence Integration: Leverage the user presence feature to reflect an…
71 votes -
Auto answer management options separately for inbound and outbound calling
the customers would like to be able to manage answer mode in different ways depending on the direction :
have the ability to enable/disable inbound auto answer
in parallel have the ability to enable/disable outbound auto answerso even if you disable the autoanswer for inbound, you can still "autoanswer" outbound calling
the impact:
when receiving a call they should be able to manually answer (1 click)
when initiating the call they should be able to dial the number without the need to click on 2 different buttons (the dial button + answer button) (1 click - the wished behavior-…31 votes -
dashboards data refresh time
customers would like to have over dashboards in RCX ( especially the real time dashboards) a shorter refresh time - 1s or 3s instead of 5 seconds.
44 votes -
Allow Using the Hold Button on the Desk Phone
Need to be able to use the Hold Button on the user Desk phone for RingCX call backs
-hold button on desk phones works properly for everything except for RingCX callbacks
-current behavior of Hold buttons on RCX callbacks are it is playing wav files that is not setup on client/company's audio files; rather it plays it files under RCX's Global Audio Files35 votes -
RingCX -- Integration with MVP / RingEX Improvements (Single Pane of Glass)
This initiative is being worked on and is called Single Pane of Glass
The biggest point of need is they need to operate under the same pane of glass. Either the RingEx client or in a web browser. You should not have to open two separate windows to handle RingCX and MVP conversations, calls, etc.
The status between MVP and RingCX needs to sync. If you are on a call on either side, the other side needs to know about this. If you set yourself away or DnD, likewise.
You cannot see MVP queues in the Corporate Directory when transferring…
73 votes -
Agent Script/Custom Field Recording Delivery
Ability to add agent script fields as an available token in Recordings Delivery Tasks. For example, we capture a caller's account number in a Text Input field, and would like to pass that to the Recording Delivery as part of it's naming scheme.
Currently, only the field name feeds over to the S3/AWS bucket in the file name.
20 votes -
Enhance Agent States
Allow Agent States to be setup and selectable by Agent Group. The current Ring Central setup only provides for one list shared by all Agent Groups setup on the system. This means other agents have to scroll through states that aren't applicable to them.
Allow sub States. For example if an agent chooses an 'Offline' state they can choose for example Coaching/Rekeying/Admin Tasks. Real time and historical stats then show the reason an agent is working offline. This can also apply to the 'Break' state, you can indicate Short/Lunch etc.40 votes -
Enable Call Controls in RCX Agent UI when dialing Mobile Numbers
When placing a call through the RCX Agent UI, Agent Call Controls are only shown when a 200 OK is returned. This is standard for landline numbers, however when dialing a cell, we do not get a 200 OK until the called party picks up. Customer would like to enable Agent Call Controls to show when a 180 RINGING or 183 SESSION PROGRESS is returned. This would allow Agent Call Controls to show when dialing Mobile numbers as well.
20 votes -
Dequeue setting per queue
Currently the global dequeue setting is set to 5, meaning if 5 agents are available and do not answer the call when routed to them the call is terminated.
The ask is to add an admin option to manage the dequeue limit per queue with the option to increase to a far larger amount to accommodate enterprise level contact centres. (50-100)45 votes -
Replace UNKNOWN CallerID in RingCentral softphone by a Studio variable content
When the RingCentral softphone is ringing beyond MAX/CXOne agent call arrival, we see UNKNOWN as callerID on RingCentral Softphone.
If max agent or CXOne agent is not on front, we don't know which caller is calling, and we cannot replace callerID by anything else than our personal callerID.
The idea is to show the customer name or a variable tagged in InContact Studio instead of UNKNOWN. It would be very easier for agents handling calls, particularly in case agents have multiple customers to answer to.
Thank you51 votes -
Adjustment - Cancel call transfer Label
Replace the following button in screenshot into a "Cancel transfer" option (to be translated for other supported languages too):
when making a transfer:
put the caller on hold > transfer > dial the 3rd party phone/REX/RCX users ,then when the RCX agent is connected with that 3rd party to whom we transfer the call , we should be able to cancel the transfer:
in the screenshot, the 3rd option: Transfer: Extension xxxx --> to be replaced by :
"Cancel Transfer : EXtension xxxx" .16 votes -
WCAG (Web Content Accessibility Guidelines)
WCAG compliance benefits a wide range of user groups, including individuals with visual impairments, hearing disabilities, motor difficulties, and cognitive limitations.
35 votes -
In-Queue-Callback Number Restriction To Prevent Misuse
The RingCX Callback feature currently allows users to enter an alternative number for a callback, with the sole restriction being that the number must originate from the same country as the inbound ANI country code.
However, there is a potential risk of abuse by malicious actors or scammers, who could exploit this feature to generate revenue for themselves by using premium rate numbers for the callback, resulting in financial implications for our customers.
To mitigate this risk, I would like to suggest implementing the ability to restrict specific numbers from being used for callbacks by creating a blacklist.
25 votes -
Internal chat for supervisors and agents
Internal Chat (ex. from supervisor to agent) inside RingCX. An internal chat can help to solve complex use case and enable multiple advantage:
- ability for agent to ask for help proactively to their supervisor.
- ability for supervisor to get involved in a less intrusive way.The internal chat developped for Engage Digital standalone is probably very close to what the this potential partner would like.
35 votesThis will be addressed as a part of the Single Pane of Glass initiative.
-
Presence sync bidirectional visual delay
Bidirectional presence sync
Shorten the delay of bidirectional presence sync from 10-15 seconds to almost no delays. When the customer ends the call from the Max agent app, it takes 10-15 secs delay before the status syncs with the RC App and Vice Versa. support case 2402542325 votes -
"My caller ID" dropdown should be searchable
"My caller ID" dropdown should be searchable - or at the least I should be able sort the phone numbers as I wish.
My company owns 100s of phone lines which we make outbound calls from, but the drop down is very hard to navigate when you have so many numbers. I suggest that list could be searchable or at least give the admin the option to sort the list to their preference.
Thanks!
9 votes -
Delay in the event after "Single Play Audio"
At present, after the first two single play audio files are played, there is about a 4-7 second delay before moving to the next queue event. This has been identified a bug by EVCR (https://jira.ringcentral.com/browse/EVSE-8256)
Steps to reproduce
setup duration of first queue event to 38
call into the queue and listen if there will be a delay after playing 2 files
setup duration of first queue event to 39
call into the queue and listen if there will be a delay after playing 2 filesActual behavior
There is delay after the end of playing 2 files…
16 votes -
Ability to cancel or extend after call wrap
Problem:
In RingCX, a customer can configure a specified amount of time for an agent to have after call work time (Wrap Time). In its current state, agents are not able to cancel the additional configured work time early or extending the time without changing their status.
Issue 1 - If a queue has a configured Work Timer configured for post call activity, if an agent is ready to take the next call early, they have no way of terminating or canceling the Work Time early and must wait until the timer expires to get the next call which and…
34 votes -
Impersonated admin showing incorrectly in the audit trail
We need an update to the Audit Trail.
Currently, if one person who is an Admin, logs in on behalf of User Name, then it shows the 'user' in the audit trail, not the 'admin on behalf of' details.
In Engage Digital, this shows "Admin on behalf of user X" as it does in RingEX.
14 votes -
Feature Request: Restrict Email Updates to Authorized Domains in User Profile
Feature Request: Restrict Email Updates to Authorized Domains in User Profile
Description:
Add an option in the RingCentral Admin Portal that allows Super Admins to enforce email domain restrictions for extension profiles. This feature would restrict users from updating their email addresses to ones outside of the company's authorized domains. When enabled, if a user attempts to enter an email address that is not part of the pre-approved domain(s) (e.g., @company.com), the system will block the update and display a notification explaining the restriction.Features and Capabilities:
Domain Restriction Setting for Email Updates: A setting within the Admin Portal under…8 votes
- Don't see your idea?