1660 results found
-
The call should not go through if the user mistakenly dials a number in the DNC list in RingCX.
The call should not go through if the user mistakenly dials a number in the DNC list in RingCX.
9 votes -
monitoring
Within RingCX Supervisor, when selecting real-time monitoring, the RingCx dial pad populates, allowing the supervisor to Whisper and Barge if needed. It also allows the call to be disconnected, meaning the caller and the agent will be disconnected if the end call button is selected by the supervisor from the dial pad. Please disable the end call option, or at a minimum after that is selected a choice should be presented to allow the supervisor to stop monitoring, or to fully disconnect all callers.
I realize that in the top banner of the supervisor window, monitoring can be stopped without…
2 votes -
RingCX Voice Queue Priority and Agent Rank
Have RingCX Voice Queue Priority and Agent Rank work at the same time. RingCX Tier 3 mentioned "Pretty sure i'ts not going to work regardless of who is assigned to what queues. They can't use queue priority and agent rank together" this does not make any sense as queue priority and agent ranks have different purpose.
5 votes -
ability to Adjust the delay associated with the "auto-answer" behavior for agents handling email interactions within the RingCX product.
Once an agent is identified as available, the system sends a new email within approximately 2 seconds. We are exploring the possibility of adjusting this delay to 5 or 7 seconds.
5 votesNot clear, provide precise details and problem statement
-
Prioritization of the Chat and Mail channels
Currently on digital channels (Chat and Mail) we have no possibility to prioritize them
This has a strong impact on our service level respects, as digital channels are not prioritized at the SLA level, whereas currently, with no possibility to set priorities on these channels, a chat can be prioritized on a call and therefore degrade our ability to pick up in time.
prioritizing calls will improve our SLA’s7 votes -
Allow agents to set a specific callback date and time when selecting the "Callback" disposition during manual calls.
When an agent selects the "Callback" disposition, a date and time picker should appear, allowing the agent to set the exact date and time for the callback as provided by the customer.
3 votes -
RingCX Digital: Email Address on To/CC Fields
There should be a Reply All option in RingCX Digital Email. When selected, it should add all email addresses from both the To and CC fields into the To field of the reply, ensuring that everyone in the original conversation receives the response.
3 votes -
Wrap Time / After Contact Work
After Contact Work – Display and Reports. Currently when a voice interaction ends, the agent state changes to Available and the timer restricts another call until the timer expires. Optimally, we have an actual after contact state that has an expiration timer and an agent override. The ACW would need to be reportable for time in this state, especially useful if agent can end early ( for example, to be able to see that they were allocated 30 seconds and only used 8 seconds. ACW would ideally be programmable for Voice only and Voice, SMS, Email etc.
ACW status should…
171 votes -
If no agent is available, do this condition
An condition that says "If no agents are available in the queue, do this". There is an option that says "if no agents are logged in, do this", but we need an "if there is no agents available, do this"
8 votes -
Improved display of RingCX agent status in Ringcentral app
Is it possible to improve display of the agent status of RingCX in the Ringcentral app integration?
Background: During brief network interruptions, agents are disconnected without necessarily noticing. A pop-up notification that they have been disconnected and/or a clearer display of the status in accordance with WCAG 2.1m, e.g., using larger icons or color-coded status fields, would help agents.2 votes -
Ability to Move Users Between Groups in RingCX
Current Behavior:
At present, when managing user groups in RingCX, a user must be manually deleted from one group before they can be added to another. This process is time-consuming and prone to errors, especially when handling multiple users.Requested Improvement:
Introduce a "Move" or "Drag and Drop" feature that allows admins to easily transfer a user from one group to another without having to delete and re-add them.6 votes -
RingCX Admin - Add the ability to select a range of agents with Shift+Click
If I want to bulk edit agents in RingCX Admin, I have to click the checkbox next to their name one by one.
Editing 50 agents takes 50 clicks.I am aware we can edit all users in a group simultaneously with the checkbox next to the group name. I would like to be able to select a checkbox, hold shift, then click a box below to select all of those agents in the range.
It should only select the range of boxes since the previous checked box.
For example, I have 100 users I need to edit who are…1 vote -
establishing contact information in RingCX incoming call
Agent would see a pop-up on the right side of the app showing the contact information during an inbound call.
They would update it but when the same customer call back in, the information won't show their name, just showing the number and unknown
Customer suggested that if possible to show the contact information so that the agents would be notified whether the caller is a VIP or not.5 votes -
CSAT Filters
CSAT filters should include a filter for: Individual or multiple Call Queue(s) and or Individual Agents
1 vote -
Clarify Error Message for Unsupported Transfers from RingCX to RingEX Extensions
Currently, when agents using RingCX attempt to transfer a call to a RingEX extension via the corporate directory, the system presents a misleading "congestion" error. This message suggests a network or capacity issue when the true cause is that transfers to RingEX extensions are not supported in RingCX.
This leads to agent confusion, unnecessary troubleshooting, and increased support tickets. We request a clearer, more accurate system message such as "Unsupported transfer destination" or "Transfers to RingEX extensions are not currently supported" to replace the generic "congestion" message in these cases.
6 votes -
Over all counts for all the leads
I have 10,000 leads in a list.
I want to see overall counts for that list, specifically:
How many are finalized.
How many are still open.
For the open leads, a breakdown by call attempts.Example:
10,000 leads loaded
5,000 still open
2,500 dialed 2 times
1,500 dialed 3 times
1,000 dialed 4 times2 votes -
Option for the customer to have RingCX Knowledgable Tools to read logs
Customer wants to know how to read logs so they can process troubleshooting on their end. What we have for now is to have them retrieve the logs and send it to our internal team so they can read it. It would be time efficient if they can also read the logs.
2 votes -
Spanish Language option for the instructions to hold your place in line
The instructions the caller hears to enter their number for a callback are only in English. Would like the option to upload my own prompt to customize the language or be able to choose a language for each flow.
2 votes -
RCX Feature Request: Auto-Assign Supervisor Access Based on Group Membership
Currently, it is not possible to automatically grant Supervisor access when an agent is added to a specific Group of Agents in RingCX. At present, enabling Supervisor access requires manual configuration through the Agent profile:
Navigate to: Agents > General > Agent Type
Change the type to Supervisor to allow monitoring capabilities while retaining agent functionality.
Then, under Supervisor Settings, manually assign which agents they will supervise by checking names under Supervises > All.
We recognize that automating Supervisor access based on group membership would significantly streamline onboarding and role management processes. As such, I’ve submitted this as a Feature…
2 votes -
Agent to Agent Transfers in SMS and Engaged Digital Messaging
Currently, the only option to transfer an SMS is to reroute to the queue group itself. It would be nice if there was an option for companies to allow agent-to-agent transfers. Our team consists of 8 employees, and rather than reroute a customer looking to speak with a specific agent digitally back to the skill group, it would be nice to be able to transfer directly to the agent to wait. Then the next time this agent would be available, they would be prompted to interact via SMS or Engaged Digital (email).
31 votes
- Don't see your idea?