52 results found
-
Allow multiple supervisors to monitor a call simultaneously
Customer wants to be able to have multiple supervisors monitor an active call via our call monitoring groups.
31 votes -
Auto-Answer Calls
We need to be able to track Users who turn ON and OFF the Auto-Answer Calls Feature from the Ring-Central App. It only logs it currently from the admin portal. Also it would be great to be able to globally disable this feature from all users at the admin level.
5 votes -
Outbound tariff | improvement of Whitelist process.
Currently, when a customer asks for a full-digit valid phone number to be whitelisted, we are opening up a base prefix of that number. The following reason was provided by Fraud Response to the customer:This is to confirm receipt of your signed Whitelist Agreement Form. New White Listed Destination(s): United Kingdom with phone part +44 7488... Please try your call again. We understand that you requested a specific phone number to be whitelisted. Please be advised that we do not whitelist entire phone numbers, we whitelist per destinations or phone part. Adding entire phone numbers restrict the message flow which…
7 votes -
BT Feature Request: Option to Opt out with the Next Gen Call Handling Update
BT Customer was not Notified Regarding the Update From Next Gen Call HandlingNo Training / Info were send to the customer Regarding the Recent UpdateMost Customer wanted to either Revert Back to the Old UI or Opt out with this UpdateCustomer Comments: New UI/ Next Gen Call Handling was not User Friendly and More Complicated than the Old UI
4 votes -
Allow dialing 811 numbers in the US and Canada
Customer requires the ability to call 811 intheir local area. This customer is a regional water authority and calls 811 almost daily to check on dig sites. This is applicable to many utilites, construction and government customers.
15 votes -
Custom labeling or sorting of call masking numbers
Within my current role I have a few dozen call masking numbers to choose from and they are supported by area code and names labeled are weird and not always in line with the associated doctors' offices (some are labeled under the practice name and some practices are labelled based on a different physician in the practices name) It is very confusing and time consuming and been a headache to deal with. If there were a way for me to label them or sort them based on larger contracts they are a part of I could be able to work…
3 votes -
RingCentral native attendant
Customer went to have RingCentral attendant for entreprise Welcome, we won't use partner application.
17 votes -
(via Jupiter/mThor) Allow manual conference call to continue after host drops
Looking to accomplish what can already be done today when creating ad-hoc conference calls via physical IP phones. The host can drop off of the conference call and the 2 far-end callers can continue to communicate.
10 votes -
Option to include IVR Menus within the Company Directory
I've seen multiple requests from our Channel Partners and now have an actual Customer request to be able to include IVR Menus within the Company Directory (just like we can with Call Queues, Paging Only extensions, Message-Only extensions, Announcement-Only extensions, etc...). Receptionists and/ur Users would love the ability to leverage the HUD to be able to transfer a call directly to a pre-configured IVR.
17 votes -
Mute incoming call notifications while currently on a call for Mobile App
while on a Carrier call, and RC Mobile App will have another call, mobile device will still ring. Requesting to have the same function with desktop app. Call waiting audio alert. Mobile app's option is only to enable or disable notification settings for incoming calls.
7 votes -
RCCC Call Plucking
Avanti West Coast rail require new technology. Their old tech Cirrus allows them to tactically choose calls in queue by call plucking. This is a critical ask that is needed. If we cannot provide this we cannot win the deal.Call plucking is required during critical emergency where they have to speak to police, train staff etc. Calling numbers may vary. Ideal solution would allow within dashboard or within supervisor the ability to choose the call in queue they have to answer.Avanti chose amazon however they couldnt provide this solution and have stopped this project now.
16 votes -
Company name in App - Multi-site
It would be great if we have the ability to change the company name that appears in the App for some users that assigned to another site within a Multi-site setted up account.Especially for customers that uses Multi-site to manage their multiple line of businesses, not branches.
16 votes -
Give an option to allow an ad-hoc conference calls to continue if the host drops
Use case: RingCentral customers often receive calls from their customers that need to be warm transferred over to another department. After the warm transfer, the call needs to be conferenced so that the customer, called party, and transferred party can all talk together. Then, the original called party needs to be able to drop the call, allowing the transferred party to become the new host of the call.Problem: After a warm transfer + merge, when the original called party leaves, the call terminates for everyone. There's no way to allow the call to continue. Workaround: If the end users uses…
2 votes -
Telus Feature Request: Ability to play far end system's hold music rather than RC client's hold music
There are scenarios of outbound calls in which far-end systems put calls on hold as follows: generate re-Invite, mark the stream with the "a=sendonly" attribute and play the music on hold. The far-end systems wish to only send media on the stream.RC system replies 200 OK and marks the stream with the "a=recvonly". RC system confirms the offer to only receive media from the far-end system.But in some scenarios, RC system does not connect the stream received from the far end to the calling subscriber (RC client making outbound call). Instead, RC system plays client's hold music, specified in settings…
2 votes -
Add UAE Dial Plan & Home Country
Red Hat is in the process of turning up a new custom engineered BYOC gateway in Dubai, UAE. They needed local UAE DIDs. UAE regulations require ALL local, LD and International calls to use UAE PSTN.Because we don't have a UAE dial plan users cannot select UAE as their Home Country and therefore customer's UAE DIDs cannot be assigned as a RC DL they can only be added as Additional Numbers (DIDs).As a result we currently have to assign a (pseudo) DL for each user and create complex call routing rules for emergency services.Red HatARR: $3,254,008SFDC Link: https://rc.lightning.force.com/lightning/r/Account/0013400001XCDIOAA5/viewRobert Half International…
7 votes -
Ability to add a note when when you forward a message
When you forward a message to another team or another member, it would be beneficial to add a note. Right now, after you forward, you have to post a message adding additional content.
1 vote -
Role+Site Domain: Hide Other Sites in Analytics, IVR Menus
I have had several customers over the years request this, but especially pertaining to larger accounts with many sites. This customer is just the most recent to bring this up.If a user has access to auto-receptionist & analytics (for example, phone system admin) and assign them to a specific site(s)/role domain, that user can still see IVR menus for other sites and also see every other site in Analytics. This can cause a lot of confusion for the end user:1. They can see the IVR menus of other sites, but they are greyed out to where they cannot edit them.…
2 votes -
Block Robcalls on Company numbers
Kelly Services is asking if there is a way to block Robo calls from the company numbers that are assigned to IVR’s and Queues. Customer knows they can set this for the users DID in the user settings. Asked the Product Manager (Dieter Rencken) and this is currently not supported to added this as a feature request.
2 votes -
Create a number type like CCRN for customer numbers needing TAS Bypass (aka CCAN)
Custom Engineering has provided a workaround for customers that need to have calls "bypass" the RC FM/FM (183/200ok) from our PBX and ring directly to the registered endpoint. See (https://wiki.ringcentral.com/pages/viewpage.action?spaceKey=CENG&title=1+CENG+SOLUTIONS+OVERVIEW#id-1CENGSOLUTIONSOVERVIEW-TASBypass) ....We need to create a number type like CCAN (Contact Center Agent Number) so when DB is queried (same as CCRN), the DB return directs the call to ICR/ICP to determine the last registered endpoint. This would remove the need to provision a customer's number in the RCLEC/TelcoNetwork infrastructure to force route these calls to the ICR/ICP components and provide an easier way to manage "TAS BYpass" numbers....OR....create…
14 votes -
Audio Conferencing | Support user / number identification
Client requests the audio conferencing, the telco conference you have when adding people on the phone as additional participants, to include the phone numbers of the users or the names if phone number known. yt the moment in Jupiter this is not obersevable, you loose the context - refer to the screenshot conference.dIdeally this should behave the same way as within Spartan, see example below spartan conference.
1 vote
- Don't see your idea?