632 results found
-
Improved alert system if no agent connected
Currently the brick positioned on the WF is based on the group ID to check if agents are connected when receiving a request, otherwise it should be configured the ID of agents with the competence corresponding to the request
For a shared team in which all employees do not take into account all customers, if an employee is connected but does not have the skills on an incoming request, no alert is issued because it is based on the group ID and therefore the entire team1 vote -
Removing "change the status of an agent" without their consent
Currently, from the interface (Ring CX Agent, Supervisor icon) we can act on the status of an employee to change it (for example, passing a break) without the consent of the employee concerned. This raises a concern on the HR side.
Delete the "Update agent status" line.
On the other hand, it should be possible to disconnect it as it is possible in the same place via "Disconnection of the agent".1 vote -
Prioritization of the Chat and Mail channels
Currently on digital channels (Chat and Mail) we have no possibility to prioritize them
This has a strong impact on our service level respects, as digital channels are not prioritized at the SLA level, whereas currently, with no possibility to set priorities on these channels, a chat can be prioritized on a call and therefore degrade our ability to pick up in time.
prioritizing calls will improve our SLA’s2 votes -
Deployment of RING CX application
Currently we use the application Ring CX to overcome the problem of pop-up, however it does not allow to code calls, nor to carry out call transfer. The roll-out of the Ring CX application, as announced later this year, should allow these features to be used.
Unable to code and transfer on the Ring CX application.Currently we perform these tasks (call end coding and call transfer) from the web interface, but this requires switching between tools (Ring CX application lient Ring CX web).
1 vote -
Expanded Queue Priority Levels
Today, RingCX has "High Level 5" as the highest tier in priority. Other providers have many more levels available for more flexibility. This is essential to customers who provide 3rd party support to a large client base with unique queues for each, paired with a tiered support approach similar to RC's Advanced/Enterprise support offerings. Priority groups would conflict with agent ranking, so that is not a plausible option if customers are utilizing agent ranks as well.
2 votes -
Ability to utilize the same functionality across both the RingCX internal features and the RingCX phone directory
Ability to utilize the same functionality across both the RingCX internal features and the RingCX phone directory
The customer wants the RingCX application to ring when transferring calls using the RingCX phone directory.
1 vote -
RingCX bulk upload on phonebook
Requesting to have the bulk upload on directories under RingCX. Uploading new contacts on directories have only one option to upload one by one. If needing to upload hundreds of contacts, that will take time.
Creating global phone book entries in RingCX screenshots of options attached.
3 votes -
Improve the functionality of scheduled callbacks
Currently a scheduled callback is triggered regardless of whether an employee is available or not.
Example : Callback scheduled by a user at 4pm, all employees are online at this time, but the call is still triggered at the specified time, and the user is waiting on the queue.
This will improve the User Experience on this callback feature2 votes -
Nomenclature of outgoing call numbers
It is not possible to copy/paste numbers containing spaces for the numbering of outgoing calls. This is a time-consuming process for manually entering numbers or deleting spaces. This feature will optimize the processing time.
2 votes -
The ability to adjust auto-replies and forwarded email spacing through email templates customization.
The ability to adjust auto-replies and forwarded email spacing through email templates customization.
2 votes -
Ability to Move Users Between Groups in RingCX
Current Behavior:
At present, when managing user groups in RingCX, a user must be manually deleted from one group before they can be added to another. This process is time-consuming and prone to errors, especially when handling multiple users.Requested Improvement:
Introduce a "Move" or "Drag and Drop" feature that allows admins to easily transfer a user from one group to another without having to delete and re-add them.2 votes -
RingCX Outbound SMS -- Cannot see messages until they are replied to
When sending an outbound SMS via RingCX, there is no record the message was sent, history, conversion, etc. until the other party replies. This makes it very hard to keep track of who you have messaged.
1 vote -
Company/Personal EX Contact Phonebook
I would like to suggest that we have the ability to access Company/Personal EX Phonebook in Ring CX, so calls come from the Contact Center number.
This would be useful for CX Agents as they do need to make outbound calls to Branches & Suppliers.
1 vote -
SPOG: Automatically set caller id
The Issue:
Right now, when agents log out and back in, the system defaults to showing the RingCX caller ID. This is how it’s designed, but it means agents have to remember to switch to their RingEX extension before making a call if they want their extension to show. It’s easy to forget and leads to the wrong caller ID being used.Suggested Feature:
Make the system automatically pick the right caller ID based on the kind of call:If it’s a call from a RingCX queue, show the queue or company main number.
If it’s an internal call (extension…
2 votes -
Ability for Any Admin to Modify, Disable, or Delete RCX Historical Report Schedule Regardless of Ownership
Currently, a RingCX admin can only modify and delete Historical Report Schedules that they own.
I would like to suggest a feature enhancement to allow an admin to delete any Historical Report Schedule, regardless of ownership. This is particularly useful for Historical Report Schedules no longer owned by off-boarded admins or users whose admin access has been revoked.
This capability can also be important if a situation arises where an employee is absent from the business due to unforeseen circumstances and the schedule needs to be modified, disabled, or deleted. Furthermore, if an admin is deleted, the schedule will show…
16 votes -
RingCX Voice Agent - Enhanced Call History: Visual Differentiation and Filtering Options
The customer would like the historical call view in Agent RingCX to display call results differently—for example, using different text colors for successful calls versus missed calls (RNA). They would also like the ability to filter call history by All Calls, Missed Calls, Incoming Calls, and Outgoing Calls, similar to what is available in RingEX.
28 votes -
Replace Default “WORKING” State with More Accurate Status When Agents Lose Connection (e.g., Sleep/Idle Timeout)
Description:
• Currently, when an agent's machine goes to sleep, loses network connection, or resumes after a period of inactivity, the platform automatically places the agent into the "WORKING" state. This is a default system state, and cannot be removed or reconfigured, similar to NCX.
However, this behavior creates confusion for supervisors and admins monitoring real-time agent states. The “WORKING” label implies that the agent is actively engaged in tasks, even though they may have lost connectivity or walked away from their machine.
Feature Request:
• We propose introducing a more appropriate default system state for these specific conditions (e.g.,…5 votes -
RingCX - More Detail on ACD Callback Unaccepted Metric
If a caller requests a callback but doesn't confirm the caller ID, RingCX will not be able to process the callback request.
This shows in RingCX Analytics as Callback Interactions Unaccepted (Call Result of Inbound ACD Queue Callback Incomplete). This definition would show that the system tried to initiate the callback but was not answered where as it was not actually triggered.
Suggest to expand the Callback results to include more granular scenarios such as
"Inbound ACD Callback Unconfirmed CallerID"
"Inbound ACD Callback Duplicate Request"
This will allow contact centres to have a significantly better understanding if they are accurately…1 vote -
exclude specific area code in local connect
Ability to add the ability to specify a particular area code when setting up or managing the Local Connect Bucket? This feature would help in targeting specific geographical regions more effectively.
3 votes -
Add Robocall filter
RingCentral should add robocall filtering to CX. I was told it happens on the EX side, but it's not happening in CX. We're getting robocalls that hang up right after they are dropped into our queue, and that's causing our abandoned rate to spike.
2 votes
- Don't see your idea?