1071 results found
-
Quality Planner for Calibrations
Use Quality Planner to create a series of contacts for calibration on a one-time or ongoing basis.
1 vote -
RingCX Enhanced SLA configuration
Not all Contact Centers operate on the 80/20 rule, being able to set both the SLA seconds and the percentage in the Call Queue would enhance and also simplify SLA through the system.
Today Queue setting lets you adjust the time, then in dashboards you need to adjust the percent and then of course reports is not configurable for %, simply uses 80%.
Enhancement would be to add the SLA % setting in each Call Queue
3 votes -
Identity Tag Visibility
In RingCX digital interactions, it is easy to see the identity tag associated with a contact. However, with Voice. there is not visibility unless a user scrolls down through the contact card.
2 votes -
Collapsable Customer Identities List
When we have several merged identities on a contact, it starts to take up the entire pane. It would be nice if we could have a dropdown if we need to see more, but have just one contact field and maybe the icons of the contact listed below. If you need to see extra details, you could hit the dropdown arrow to expand. Will attach screenshots of Today vs. Example collapsed view
1 vote -
combine similar ideas
There seems to be a lot of overlapping ideas. Is there a review process to combine similar ideas. there by letting your team know that is really important. there are over 7000 ideas, some of them must be the same.
1 vote -
Add a checkbox in Presence for monitored calls on hold
Could an additional checkbox be added in the Presence settings that would say “Ring my phone when any user I am monitoring places a call on hold”. This way when a monitored line is put on hold, it will not make all the other phones start ringing audibly. It's unnecessary for a user to answer a held ringing call, and then have the caller say that they were just put on hold. And then when they place them back on hold, it rings all the phones all over again.
6 votes -
Visible/Vocal notification for commitments
We would like to have a pop-up notification or an audible notification for the agent when a commitment pops up on the Salesforce softphone.
Otherwise, if the agent is working somewhere else or has minimised their softphone, they miss the commitment, which is a bad customer experience.2 votes -
Ability To Dial Out User Extension Number in CXone Agent
Customer wants to have the ability to dial out other agents or user extensions on CXone Agent in Contact Center. Currently, customer can only dial phone numbers on CXone Agent.
1 vote -
Inbound SMS to appear on all logged in agents
When SMS comes in through the SMS Channel, there should be an option to configure it so that the same SMS shows up at the same time across all agents logged in.
1 vote -
More Detailed SMS Transcipts Report
Customer wants to have a more detailed SMS Transcript Report that shows Employee ID, First Name and Last Name so that it will be easier for them to look for contacts that replied to their SMS.
6 votes -
RCX - Ability to have agents share my stats to sup at end of shift without exporting full page
Customer needs the Ability to have agents share my stats to sup at end of shift without exporting the full page. This is due to the delays we're experiencing for Historical reporting. we are aware that Historical reports are delayed for 6 hrs (23004883)
6 votes -
Requesting an enhancement to have on-screen notifications for incoming calls, regardless of state the agent. The notification should have th
Requesting an enhancement to have on-screen notifications for incoming calls, regardless of state the agent. The notification should have the following traits/characteristics:
Auto-dismiss if no agent answer and customer hangs up before sending to agent VM greeting.
Contain 'Accept' and 'Decline' buttons which direct the call. 'Accept' will allow a call through to the agent. 'Decline' will send the customer to the agent's VM greeting.
Any other pertinent information to be included (i.e. number of incoming caller, etc.)
15 votes -
Require option to select ALL the Emergency Response Location on Bulk Enable Template
Require the option to select ALL in the Emergency Response Location on Bulk Enable Template. This is just to provide ALL the locations within the Template download in Excel. I realise that it is restricted to only 50 at a time but it is quicker and easier to add them in Excel than on the RingCentral Platform.
But basically see my screenshot attached I would just like the option to select ALL option for the Emergency Response Location similar to what you can select on the Role or User Template so that when Bulk uploading I can choose the correct…1 vote -
RCV video link in RCX Customer Card
When an agent escalates a RCX digital interaction to a RCV video meeting, there should be a way to show this video meeting as part of the customer contact card to complete the journey.
This could either be in form of a summary or posting the link to the RCV recording.
Reason for the ask is so managers of full visibility of the customer journey and any interactions that took place.3 votes -
System schedules accessible via Queues, channels, IVR
System schedules accessible via Queues, channels, IVRs.
Have the ability to create schedules/holidays on the Admin portal then apply them to queues, digital channels, and IVR call flows. Having to manually create schedules in each of these categories is a lot of work. Also having to create custom routing in the IVR designer is a lot of time.
16 votes -
Admin role to have ability to log out agents
An admin that does not have edit abilities in their roles, should still be able to log out agents in the realtime dashboard.
6 votes -
Text Rules
Just like how we can set up call rules there should be a text rules feature as well so that I can add my work hours. I’ve gotten texts from clients that are non-emergency at 3 and 4 in the morning that I shouldn’t be notified for outside of work hours. I don’t want to go into the app and set my status as Do Not Disturb every single day. I suggest text rules being added as a feature.
1 vote -
Dequeue setting per queue
Currently the global dequeue setting is set to 5, meaning if 5 agents are available and do not answer the call when routed to them the call is terminated.
The ask is to add an admin option to manage the dequeue limit per queue with the option to increase to a far larger amount to accommodate enterprise level contact centres. (50-100)45 votes -
Engage Digital - Create WFM IEX feed to take into account time spent working in ED
We utilize the NICE inContact WFM IEX tool and during setup we were told it would be able to integrate with Engage Digital to take into account work done in that tool as well as within the Contact Center for forecasting\staffing, however to date that is not something that has been configurable. We would like to see a specific data export that could be automated from ED into IEX in a format IEX can utilize to account for time spent by our agents working in Engage Digital to fully take advantage of using both products.
1 votePlanned · AdminChris (Sr. Manager, Customer Experience Solutions Engineering, RingCentral) respondedWFM APIs are available on RingCX for Voice. Digital WFM APIs are planned to be implemented
-
RingCX - Survey report
The ability to get a report on surveys both for voice and digitial.
Ability to see how many surveys were sent, how many answered, results of the replies, overall score etc.
25 votes
- Don't see your idea?