1411 results found
-
Ringcentral to offer Indian number as IVN and Global office
For customers to identify callers that are calling India conference bridge numbersCurrently, as per India Global Conferencing Bridge Service. Customers are getting CLI (caller id) as 16033XXXX, which is in line with IGCS product design.As per Telco Ops Team
India IVN numbers and any local India numbers are reserved for Premium Conference and Meeting numbers.NOTE: Currently our contract with the NEW provider is that numbers are exclusive for Premium conferencing / Meetings use only.
Unfortunately, we can only provide numbers from the current provider (exclusive for Premium conferencing / Meetings use only).
India local number that is not limited to…2 votes -
Recording message after customer has been put on hold
When a customer calls, I can review the conversation up until the time I place the customer on park to contact the agent. When I get back on the phone with the customer, the recording is not operable. For example, I received a call from a customer who would like to remove collision from the vehicles on his auto policy. I placed the call on park and the agent was not available. I then picked up the parked call at which time the customer told me in detail which vehicles he would like to remove collision and what day he…
1 vote -
Report showing missed called when agent isn't on the phone
Looking for a report that shows # of missed called BUT when the agent isn't already on another call. We want to have an accurate picture of missed calls when agent is available. We do not use queues either
2 votes -
Unlimited rings to user. Never go to Voice Mail
Would like to have a User profile that is used for a Ring Group to have unlimited rings and never go to voice mail.
1 vote -
ability to log in to multiple devices using RC Phone without creating a virtual number
customer wants to see the messages on the RingCentral phone app that was sent to their RingCentral Phone App using a virtual number and wants to be able to still reply to it. because right now it shows the number is not assigned.
1 vote -
Ability to answer calls while on active call on a call queue without upgrading the plan for Call Queue pick up.
Customer said that this is a basic set up that they wanted to happen since it's being done from other companies. Customer doesn't want to upgrade her plan just for this feature.
1 vote -
"My Caller ID" Search feature
Make the outbound call experience easier, allow us to search the outbound call number or at least change to alpha organize- 100+ phone numbers to search through over here! Thanks!J
3 votes -
Bulk Contact Upload for Polycom desk phone
Currently contacts have to be manually added to Polycom VVX 410 - the phone cannot pull the imported contacts from the RingCentral cloud. A resolution for this would be much appreciated.
1 vote -
DND state routes call to another user but voicemail circles back
This would allow us to keep the current setup we've got in Mitel once moving over to RingCentral. There's no ability to change where the call flow goes once in the DND state. We can achieve something Similiar through call rules, but this seems like a feature that should already be implemented.
2 votes -
More programable options for Presence keys
We are coming over from Mitel and were hoping for some feature parity between our old system and our new system. There was one feature in particular that was very useful called Monitor Extensions. There is something similar with Presence keys on RingCentral. But on Mitel there were a lot of different configuration options so that users who monitor other users calls could either set the monitor key to ring or not ring. And this was configured for each line so there was more control over what would cause the user who was monitoring other user’s calls would actually ring…
2 votes -
Show how long someone has had an "away" status
In other apps, such as Teams, if someone's status is "Away" or "Offline" it will show the last time they were available. It might say "last seen 19m ago" or something similar. Could we get this visibility in RingCentral? I've had managers ask me for this so they can see who is abusing their "Accept Queue Calls" toggle button.
2 votes -
Adjust Caller ID reader speed, VM retrieval from Deskphone.
When retrieving VM from Deskphone, the system voice reads the Date, Time, and Caller ID of the caller. The Date and Time portion is OK, but the Caller ID portion is a little to fast, and it is hard for most users to catch the number.
2 votes -
Outbound calling improvement
I get a complaint often that when users start to dial, the phone dials that initial digits (area code, etc) and says "extension not found" or some similar problem. There are probably timers at play with that? (and does that affect 911 call timing?) ... but users would like to be able to dial the full 10 digits before the call takes off. I tell them to dial and THEN lift the handset but it is intuitive to do it the other way around with traditional telephones, so it is a hard habit to break. Just a thought for improvement.
1 vote -
Ability of the Shared line phone number to send and receive SMS
Ability of the Shared line phone number to send and receive SMS
2 votes -
Call forward All from one device should update to the entire account
Currently, when call forward all is set on a polycom device, or another device on a licensed account, that call forward all only affects the reachability for that device, but calls will still come in to other devices on the same individual's account while forwarding from the device that has the CFA set.Setting call forward all on one device on the account should update it for the account.
6 votes -
Disable Incoming Call Pop on Avaya J100 series phones
We have a request that Incoming Call Pop is DISABLED as default as part of the Auto-Provision process on Avaya J100 series phones.Customers migrating from IP Office (or Aura) are used to Call Appearances and toggling between calls (line 1, line 2, line 3). Call Pop is a nuisance, and better OFF. It is simply impossible to disable this feature handset-by-handset when a company has 30 or more users. Especially if we are not onsite at install or the customer has multiple sites. Also if the phone is default-reset, the function comes back on. Then you have some users with…
1 vote -
Bug report: When an account is disabled or has only a disabled line, if in a queue it can disable the queue
We have experienced this on occasion-- someone would leave and their user either disabled or not would remain in a queue. Their previous phone (which had been reassigned) then acts disabled, even after reassignment and resync.The exact conditions this last time: parts user left, their phone was reassigned. The user was moved to the new parts queue and assigned the phone. The phone was renamed and then resynced.When the call queue was called, the phone would not ring. Only after the old user was removed from the queue would the queue ring the old user's phone.The old user had a…
1 vote -
Transfer a call from hold
You have to unhold and there is an awkward pause before transferring a call. We should be able to transfer from hold.
4 votes -
Need to update the profile status when on call - RC phone
Need to update the profile status when on call - RC phone
1 vote -
want to have the option for the call recording be continued even they are on the conference call
customer want to have the option for the call recording be continued even they are on the conference call
2 votes
- Don't see your idea?