772 results found
-
Allow Scheduling of Custom Rule Enablement
After a custom rule is crafted, I'd like the ability to schedule the turning on and turning off of the rule. Example: We have a site that is normally closed on Fridays, their on-hours schedule lists them as open on Fridays, so that we can still present callers with central service options. We route calls to that special IVR using a custom rule covering every Friday. They'd like to answer calls at the site on a few random Fridays -- but there is currently no easy way to schedule that.
My proposed idea would allow you to schedule on/off times…
9 votes -
Route 911 call to onsite Police Force/Security vs. Public Emergency Services
Customer requires that 911 route to their own onsite Police/Security Force/Emergency Services team rather than PSAP. If escalation to other services is required, they will handle. Critical to this opp and other Higher Ed customers
9 votes -
Shared Lines on softphone apps
Need shared lines on mobile devices and softphones - Zoom has this feature.
9 votes -
Automate the provisioning of TAS Bypass Numbers
Enable customers to self-serve the addition of TAS Bypass Numbers in Service Web. When a Direct Number is added to a user, present a checkbox to allow them to select the number to be conditioned for TAS Bypass. The system would then auto-provision (condition) the number. The system/portal should also visibly indicate which numbers they have conditioned for TAS Bypass.
9 votes -
transfer call indicator
The caller ID should have a transfer indicator to indicate whether the call is a transfer or a direct call. For example "Transfer from (Caller ID Name)"
8 votes -
connect the intercom Grandstream to RingCentral
Can you support Grandstream brand intercoms? We need it very much !
8 votes -
Caller ID on transfer
Transfers - can we please have a feature implemented where end users can choose to have original caller ID displayed when transfered?
I.E:
Caller A calls the company, Employee B answers the phone and cold transfers to employee C. Employee C either answers or doesnt. By default in EX you only can have Employee B shown as the Caller ID. This isn't ideal in every environment.We would like Caller A info to be displayed for employee C, instead of employee B's info.
8 votes -
Beeping tone when when the other party hang up the call
An option to configure or disable the tone that the end-user hears when the other party hangs up the call
8 votes -
Ability to add Cisco Phone Custom Configurations to extend time on auto dial to give agent time to transfer calls .
Whenever dialing out on a Cisco desk phone. The auto dial out times out too quickly causing issues when trying to conference or transfer or even just make a call. The customer would like to configure the phones remotely to all of their phones instead of having to configure the phones one at a time manually.
8 votes -
Allow multiple participants in conference call using Mitel phone
With MITEL, was able to do conference call with multiple people that allows more than 3 participants. When switched to RingCentral, can only do up to 3 people including the initiator. With RingCentral, call the first person, hit conference button, dial the second person, then hit the conference button again to join. Then, after this conference button disappears and there is even no option to add more person in the call.
8 votes -
Generate report for users with custom voicemail greeting
Generate report for users with custom voicemail greeting
8 votes -
Ability to switch to backup internet without disconnecting desk phones.
Ability to switch to backup internet without disconnecting desk phones while switching network.
8 votes -
CNAM Update
CNAM Update for Canada Customer.
Since once a CNAM has been saved on the Database, it cannot be changed.
8 votes -
Increase the voicemail time limit
The voicemail time is too short. Is there a way to increase the time limit, the ideal time limit would be up to 10 minutes. We service all time zones w/ calls coming in after hours. It is very frustrating for the client to call back to continue a voicemail 2 to 3 times.
8 votes -
Add UAE Dial Plan & Home Country
Red Hat is in the process of turning up a new custom engineered BYOC gateway in Dubai, UAE. They needed local UAE DIDs. UAE regulations require ALL local, LD and International calls to use UAE PSTN.Because we don't have a UAE dial plan users cannot select UAE as their Home Country and therefore customer's UAE DIDs cannot be assigned as a RC DL they can only be added as Additional Numbers (DIDs).As a result we currently have to assign a (pseudo) DL for each user and create complex call routing rules for emergency services.Red HatARR: $3,254,008SFDC Link: https://rc.lightning.force.com/lightning/r/Account/0013400001XCDIOAA5/viewRobert Half International…
8 votes -
Allow users to create a generic out of office message.
Allow users to create a generic OOO message.
Separately, they could record the time frame they will be out of the office.
This would (conceivably) allow them to record one message for reuse.
Example:
You have reached the voice mail for Veronica Lee.I will be out of the office from [variable-Start Date] to [variable End Date].
I you need immediate assistance, please contact the Help Desk.
If your request requires my personal attention, please leave a detailed message and I‘ll get back to you when I return to the office.
8 votes -
Call Recording - Ability to be Paused by Caller(external)
The client would like to have an option wherein when a caller / called party (external) has the ability to pause the call recording by pressing *9 or other function.
7 votes -
dial by name directory with same first name
"The dial-by-name directory is currently routing calls based on the oldest extension created rather than a true alphabetical sort. When multiple users share the same first name, the system should automatically use the last name alphabetically to differentiate them."
7 votes -
Automatic Emergency Response Locations for limited extensions
To have an option to enable and manage Automatic Emergency Response Locations for limited extensions, so that location updates are handled automatically when a device is moved to a different physical location, rather than requiring manual reassignment each time.
7 votes -
BT Feature Request: Custom Configuration for BT provided phones
BT Feature Request: Custom Configuration for BT provided phones
Details : Currently, BT-provided phones are not permitted to undergo any custom configuration changes because doing so would void the manufacturer’s warranty. The prohibited customizations include, but are not limited to:
*Blind/Attended Transfer Settings for Yealink phones
*Custom Line Key Setup
*Extending Transfer Timers for Cisco phones
*Any configuration requiring access to the phone’s web interfaceExpected Behavior: To be allow to apply the custom changes according to the customers request for their phone set up
Brand : BT Business
7 votes
- Don't see your idea?