294 results found
-
Retain Caller ID information regardless of blind/warm transfer type
When transferring calls, Caller ID information is only passed on blind transfers. It would be helpful if the caller ID information was passed to the new recipient regardless of transfer type.
132 votesNeeds More Information ·
AdminJessica Hernandez
(Community and Social Media Engagement Manager, RingCentral)
responded
Hello everyone, this has been implemented in 22.3.1. This version of the app was rolled out to all accounts over 8/25-8/31. No additional action is required to initiate the feature on the app, please confirm you are on at least 22.3.1. This feature allows for caller ID to transfer in these scenarios. Warm/Consultative Transfer: - Incoming call from PSTN/RC # to RingCentral and transferred to RC number Blind Transfer: - Incoming call from PSTN/RC # to RingCentral and transferred to RC number - Incoming call from PSTN/RC # to RingCentral and transferred to RC voicemail The feature requires the following endpoints to work successfully. This applies to both the user invoking the transfer as well as the user who is the destination of the transfer.Desk phones: Any Poly, Avaya or Unify models. RingCentral App: Version 21.4.30 or laterRingCentral Mobile App: Version 22.1.10 or laterRingCentral Phone App: Version 22.2 or later… -
Add Logitech Headset support (BETA) to the RC App
The app has Headset support for Jabra and Plantronics Hub. Please extend this support to Logitech, so we can take advantage of the call control buttons on those devices too.
45 votes -
Yealink Key Templates
If you are selling Yealink phone you should already have the templates available in the system.
34 votes -
Certify Poly Rove (New Dect Cordless Offering) for Retail and others ASAP
We need to work on getting the Poly Roves certified for a variety of customer opportunities. Retail, Healthcare, Warehouse and Manufacturing. They have line Presence button, are ruggedized, and more configurable
33 votes -
Presence on deskphones should only show user on first 2 lines, not every line
Prior to an account migration desk phones (such as Polycom VVX311, VVX411, VVX601) would only show the users name on the first 2 presence lines. Now, if no presence entries have already been manually added by the user, every line shows the users name.This is apparantly from the receiving account being on a newer version (v22) than the originating account (v21). This should be changed back to the user only showing on the first two lines.
27 votes -
Unable to Conference with Two External Calls
We recently migrated to RingCentral and have come to discover that one of the biggest features we use is not available with RingCentral. From our desk phones, we are unable to conference if the two calls we want to conference are both external. It gives a busy signal instantly.To clarify, if we call an external phone number, then try to conference with a second external number, this does not work. However, if we call an internal extension, and then try to conference an external phone number, that works fine. If we call an external number and conference and internal number,…
21 votes -
Use RingOut without touching your desk phone
We'd like to have the option to use the desktop app in conjunction with a desk phone like this: When dialing out (from the computer/app): 1) click an extension or click or dial a number.2) your desk phone (e.g. J139) would go "off hook" on speakerphone and the call would be placed. No touches.3) you simply wait for the other person to answer... you never touch your phone.
20 votes -
Transfer Directly to Voicemail Softkey - On Mitel 6940 Phones
Hi we have Mitel 6940 phones at our offices, running on the RingCentral platform. The Mitel 6940 phones seemingly have the capability to transfer calls directly to voicemail via a "VM" softkey that appears when transferring calls (see YouTube video: https://youtu.be/Dfccs5AnSNY). However, it does not show up for us. After discussing with our RingCentral representative, it seems that this feature is not enabled for these phones on the RingCentral platform. Would be great to have this feature available as it's heavily used in our environment.
20 votes -
Change the default soft keys on Polycom phone when provisioning the phone.
Current default soft keys at the bottom of the screen on VVX350 are new call, intercom, dnd, and page. Theses are useless for most users:New call: this button is asinine, there are already 4 ways to make a new call.1) pick up the phone and dial2) dial then pickup the phone3) press the one of the hands free button and dial4) dial then press one of the hands free buttonIntercom: i have never worked in an office where a general page went over the phone system to interrupt productivity, meetings, call with important clients. this feature is just rude to…
19 votes -
Company Directory accessible on physical phones
This would benefit not only the company but the person administering the phones. On a Cisco phone (88XX) there currently are two address books, a system address book which is not functional and a personal address book which is unique to each phone. In order to have a "company" list, we currently have to utilize the personal address book and manually enter each entry into each phone. If anything changes(additions, changes, deletions), we have to manually change it in each phone. This can be very time-consuming to manage but at present is the only way to get a company directory…
19 votes -
Allow Custom Wallpaper on Cisco phones
Branding customization should be easily available. We can easily add wallpaper manually, but when the phone re-syncs, the RC wallpaper returns.
19 votes -
Ability to add Company Logo in Desk phones
We need our deskphones to display our company logo for business purposes.
17 votes -
Control Business Hours, After Hours and/or Custom rules via hard phone
Use case is activating or deactivating business hours/after-hours/custom rules using a button on a physical phone. Customer needs to route calls at a touch of a button to be able to provide better customer service to live patrons. This WILL be required for most Mitel customers that we want to move to RC.
16 votes -
Add Polycom VVX 600 as supported device for Hot Desking
We would like to see the Polycom VVX 600 be added as a supported device for the purpose of Hot Desking
15 votes -
Sync contacts from system and apply this to all Yealink devices on account.
When you import contacts from portal site, it should automatically sync with all Yealink devices
15 votes -
Mitel Do Not Disturb presence
Please add the ability for users to see when a phone has been placed on Do Not Disturb. Currently, if a Mitel phone is placed on Do Not Disturb their presence still shows green/available. If a phone is o Do Not Disturb the phone should show a red status to other users. This seems like a simple fix.
15 votes -
Self Service Custom Configs (Poly)
Customer would like access to create, upload, and manage their own custom configs for their Poly devices instead of relying on SEs or PS or support for ongoing MACD as their requirements evolve.
14 votes -
Show Original Callers Number in Caller ID When Transferring Calls on Mitel Phones
We are having an issue where the wrong caller ID is displayed when we transfer calls. When you transfer a call, if you press the speed dial on your phone, it will display the user's extension for the person receiving the transfer instead of the caller’s phone number. It is very confusing when we answer the phone expecting it was an internal call only to find an external caller. It appears that this was corrected for some other phone manufacturers, https://ideas.ringcentral.com/ideas/ENTCOM-I-48. Can you please correct it on the Mitel phones? We are using the Mitel 6940 phones.
13 votes -
Key Templates for Poly VVX450
Please add a key template for the Poly VVX450 so we can centrally manage speed dials and the function of the softkeys.
13 votes -
Corporate Directory - External contacts
To be able to access a directory of contacts whereby the contacts are not RingCentral users. In this example a supplier or service provider contact information. The contacts should be accessible from a Poly VVX endpoint using the phone only.
12 votes
- Don't see your idea?